Scie à ruban pour métaux Bomar Ergonomic 275.230 DG

Manual Metal Band Saw BOMAR Ergonomic 275.230 DG Metal Band Saw Machine
from 2015 with 2 new bandsaw blades
Very high cutting accuracy. With this machine
cuts of 90° as well as miter cuts left up to 45° and right up to 30°
are continuously possible. (swivel range left 45° and right 60°)
Drive power: 1.1 / 1.5 KW 400V / 50 Hz
Ges. Connected load: 2.7 kVA
Belt speed: 40 / 80 m/min
Saw band dimension: 2720 x 27 x 0.9 mm
Smallest diameter: 5 mm
Remaining piece length: 20 mm
Material support height: 760 mm
Dimension: 1400 x 640 x 1270 mm
Basic equipment
Lowering of the saw arm via hydraulic cylinder
stepless adjustment
easy and fast clamping of the material due to a quick clamping device
easy
manual shifting of the vice R/L
electrical band tension monitoring with saw band breakage control
Coolant pump with dual feed to the saw blade guides
Carbide saw band guides and guide rollers
Measuring stop 500mm
Driven chip brush
Bi – metal saw band M 42
Workflow
Material is fed manually and clamped by a spindle vice with quick clamping device
The saw feed is adjusted on the hydraulic lowering cylinder
Saw feed takes place independently! Saw frame is lifted manually after end of cut