Pont élévateur ciseaux TyreON TSC4000X2 XLLR Low Profile 4T floor mounted scissor lift - Large neuf

Capacity 4000 kg
Lifting height 5 - 198 cm
Drive 2.2 kW Electric-hydraulic
Type Fully automatic - Heavy duty
Platforms 148,5 - 230,5 cm - Double extensions
► Hydraulic mechanical safety lock
► Safety and overload valves in the cylinder systems
► No air required - immediate descent
► Auto-stop at 25 cm + slow descend
► IR synchronization monitoring
► Tip-lever system
► Axles with bearing bushes
Delivery incl. 4 x 100 cm long ramps voor 5 cm ground clearance
Floor bolts, floor gutters, rubber blocks (4)
Voltage 400V
Package L160 x W80 x H42 cm - 900 kg
Controller L48 x W41 x H116 cm - 50 kg
Certification CE / TUV Directive EN1493:2010 Vehicle Lifts
Colour As of 2024, completely anthracite grey RAL7016
3 models available
TSC4000X2 XLLR 5 cm drive-on height - 100 cm long ramps
TSC4000X2 XLSR 10.8 cm drive-on height - 56 cm long ramps
TSC4000X2 iXL 0 cm drive-on height - Flush-mounted in the floor (12 cm)
If the platforms of other wheel-free scissor lifts are too short, this scissorlift is the ideal solution.
The two-way extendable platforms have a length of 148.5 cm to 230,5 cm.
Designed for lifting small and large passenger cars and sports cars, SUVs, commercial vehicles and buses with short, long and multiple extended chassis up to 4T.
This Low Profile lift with 5 cm drive-on height is used by Ferrari, Porsche and Maserati dealers and is suitable for all vehicles with 5 cm ground clearance or low suspension.
The carlift lifts directly with full force from the lowest point thanks to the tip-lever system.
The heavy-duty hydraulic pump unit provides the 4 cylinders with the necessary lifting force.
A safe direct lowering of the platforms, as soon as the down button is pressed, is characteristic of this hydromechanical wheels free scissorlift.
Safety
Optical and acoustic signal when lowering
Auto-stop at 25 cm height (delayed further descending by repressing the down button)
A height limit switch makes the hydraulic engine stops when the carlift reaches highest point
Procedure for lowering in the event of a power failure
An overpressure valve prevents damage in the event of a too heavy vehicle
The hydromechanical locking prevents the scissorlift from lowering in the event of a hose rupture
Available in 3 versions 
Delivery of the double scissorlift
The TyreON TSC4000X2 XLLR onground double scissorlift and its controller are functionally tested and subsequently packed together with:
A set of anchoring bolts
Custom-made hydraulic hose set + accessories
4 steel ramps, dimensions per piece: L100 x W60 x H5.8 cm - 35 kg
4 rubber mounting blocks(L12 x W16 x H4 - cm)
A comprehensive set of protective covers for the floor
The installation and operating manual
Hydraulic oil is not included - 20 liters of HV-ISO-32 can be ordered optionally
TSC4000X2 XLLR Low Profile 4T floor mounted scissor lift - Large lifting range, 66 cm wide extendable tables 148.5 to 230,5 cm - Hydromechanically locked - no air required - Also for vehicles with 5 cm ground clearance / low suspension
The price is excluding VAT and delivery costs.