Scie à format Lectra TopSpin CV1.8-3

Preis: Contact us for price
Marke: Lectra
Lectra TopSpin Cutter
Manufacturer: Lectra
Type: TopSpin CV1.8-3 including unwinding trough for fabric bales
Year of construction: various from 2002 – 2010
Condition: Used – fully functional – Packed and neatly stored – Sale without licenses
Technical data
Power supply (all cutter versions)
Vacuum
Three phase - 400 V - 50 / 60 Hz
Control electronics
3-phase + PE (GND) / 5.5 kVA
Single phase - 230 V - 50 / 60 Hz
Refer to the Installation chapter before connecting the equipment to the mains
Pneumatic supply (all cutter versions)
Nominal pressure: 7 bar
Minimum pressure: 6 bar
Maximum flow rate: 0.5 m³/h (17.7 ft³/h)
Environment
Temperature: 10 to 40 °C (50 to 104 °F)
Humidity: 30 to 80% non-condensing
Design specifications and overall dimensions
Minimum floor area (excluding TS-TURBEXT enclosure)
Version 1.8: 6700 mm x 4800 mm (263.78" x 188.98") ... 32 m² (38 yd²)
Minimum floor area of TS-TURBEXT enclosure
2600 mm x 2080 mm (102.36" x 81.89") ... 5.4 m² (6.5 yd²)
Cutter dimensions
Version 1.8: 5534 mm x 2505 mm x 1320 mm (217.87" x 98.62" x 51.97")
Overall dimension of the TS-TURBEXT enclosure
1580 mm x 1000 mm x 1250 mm (62.20" x 39.37" x 49.21")
Height of cutting surface: 850 ± 50 mm (33.46" ± 1.97")
Cutter weight (without option)
Version 1.8: 2550 kg (5622 lb)
TS-TURBEXT body weight: 120 kg (265 lb)
Functional and performance specifications
Effective cutting area
Version 1.8: 2780 x 1820 mm (2780 x 1820 mm) (109.45" x 71.65")
Effective discharge length (1.8 and 2.5 versions): 1300 mm (51.18")
Maximum cutting speed: 100 m/min (109 yd/min)
Maximum acceleration: 10 m/s² (11 yd/s²)
Find more here
afficher les coordonnées
Contact us at
afficher les coordonnées